Industrial cellular RTU for data acquisition, storage, control, alarm and transmission.
TY511 LCD RTU
LCD display for data and configuration
Rich I/O, local data storage for back up
Automatic alarm trigger
Rich I/O, local data storage for back up
Automatic alarm trigger
TY511: LCD RTU
● 2-RS232, 2-RS485, 8-DI, 8-DO, 8-ADC, 2-Pulse, 3-Power output
● Supports up to 16MB data storage
● LCD display of data and configuration*
● Modbus TCP/RTU, MQTT, TCP/UDP protocols
● SMS alarm and AT command
● 4G LTE CAT 4
● Supports up to 16MB data storage
● LCD display of data and configuration*
● Modbus TCP/RTU, MQTT, TCP/UDP protocols
● SMS alarm and AT command
● 4G LTE CAT 4
* Customized firmware
- Overview
- Specifications
- Case Study
- Order Information
TY511 Series RTU is a type of industrial cellular remote telemetry unit,
which adopts high-powered industrial 32-bits CPU, with multi-layer software
detection and hardware protection mechanism to ensure reliability and
stability of the device.
It supports worldwide carrier 4G/3G/2G cellular network FDD-LTE, TDD-LTE, and HSPA/UMTS/WCDMA, EVDO, TD-SCDMA, EDGE, CDMA 1X and GPRS, to realize real time data acquisition, storage, control, alarm and transmission, as well as security of data transmission.
TY511 has rich interfaces, including tipping bucket rain gauge input, RS232, RS485, I/O, etc., and it has been widely used for
remote monitoring and control applications, such as, hydrology, water resources, water pollution, water treatment, reservoir dam,
mountain flood disaster, geological disaster, meteorology, environmental protection, new energy resources, etc.
*Customized firmware
 "TY511 NEAR")
System
● Flash: 512KB
● SRAM: 256KB
● Data Storage Flash: 16MB
● Flash: 512KB
● SRAM: 256KB
● Data Storage Flash: 16MB
LCD Screen:
● 128*64 dot matrix, backlight
● 128*64 dot matrix, backlight
Cellular Interface
● Antenna Connector: 2 × 50 Ω SMA Female
● SIM Slot: 1
Serial Interface
● Connector: Terminal block, 3.5 mm female socket with lock
● Ports: 2 × RS232+ 2 × RS485
● Baud Rate: 300bps to 230400bps
● 15KV ESD Protection
I/O
● Connector: Terminal block, 3.5 mm female socket with lock
● DI: 8(optical isolation)
Logic 0: Wet contact 0-3VDC, or dry contact close
Logic 1: Wet contact DC 5-30V, or dry contact open
● Relay: 8
Max switching voltage: 30VDC/250VAC
Max switching current: 4A
Max switching power : 120W
● ADC: 8
16-bit AD, supports 4-20mA current signal input, and 0-5V voltage signal input is optional
● Power Output: 3
Default is 12V. Rated output current of 1 power output is 1A, and total rated output current of 3 power outputs is 2a, built in overcurrent pr otection
● Pulse Input: 4
2xtipping bucket rain gauge input(low level 0-1V)
2x pulse input(high level 2-30V)
● DO(Digital Output): 2 (optical isolation, Open Collector)
Rated drive current : 50mA
Rated drive voltage: 35V
● DI: 8(optical isolation)
Logic 0: Wet contact 0-3VDC, or dry contact close
Logic 1: Wet contact DC 5-30V, or dry contact open
● Relay: 8
Max switching voltage: 30VDC/250VAC
Max switching current: 4A
Max switching power : 120W
● ADC: 8
16-bit AD, supports 4-20mA current signal input, and 0-5V voltage signal input is optional
● Power Output: 3
Default is 12V. Rated output current of 1 power output is 1A, and total rated output current of 3 power outputs is 2a, built in overcurrent pr otection
● Pulse Input: 4
2xtipping bucket rain gauge input(low level 0-1V)
2x pulse input(high level 2-30V)
● DO(Digital Output): 2 (optical isolation, Open Collector)
Rated drive current : 50mA
Rated drive voltage: 35V
USB Port (Reserved only)
● Port: 1
Micro SD Slot(Reserved only)
● Port: 1
GPS (Optional)
● From Cellular module, not standalone GPS module
● Antenna Connector: 1 × 50 Ω SMA Female
Power Requirements
● Connector: Terminal block, 3.5 mm female socket with lock
● Standard Power: DC 12V/1.5A
● Input Voltage: 5-35 VDC
● Connector: Terminal block, 3.5 mm female socket with lock
● Standard Power: DC 12V/1.5A
● Input Voltage: 5-35 VDC
Software
● Serial Port: MQTT, Transparent (TCP Client/Server, UDP Client/Server), Modbus Gateway (Modbus RTU to Modbus TCP), DNS
● Management: Config Tool, Cloud DMP (Device Management Platform)*
● Serial Port: MQTT, Transparent (TCP Client/Server, UDP Client/Server), Modbus Gateway (Modbus RTU to Modbus TCP), DNS
● Management: Config Tool, Cloud DMP (Device Management Platform)*
Physical
● Ingress Protection: IP30
● Housing & Weight: Metal, 770g (1.70lbs)
● Dimensions: 54.2×127×46.6mm (6.07x5x1.83 inches),without antenna and accessories
● Mounting: Desktop, Wall mount
Environmental
● Operating Temperature: -35°C to +75°C (-31℉ to +167℉)
● Storage Temperature: -40°C to +80°C (-40℉ to +176℉)
● Humidity: 0% to 93% (non-condensing) at 25°C/77℉
Others
● LED Indicators: System, Online, Power, Error
● Warranty Period: Standard: 12 Months, Extended: 2-5 Years*(Please refer to warranty policy)
● Approvals: CE*, RCM*, NBTC*, FCC*(*Under Progress)
● Warranty Period: Standard: 12 Months, Extended: 2-5 Years*(Please refer to warranty policy)
● Approvals: CE*, RCM*, NBTC*, FCC*(*Under Progress)
Note: some I/O are reserved only and disabled, please contact Bivocom if you have more request.
Dimension(mm)
 "Products_Dimension_TY511")
Model:
TY511-LF
4G LTE CAT4 LCD RTU
TY511-LF
4G LTE CAT4 LCD RTU
Part Number:
TY511-L<1>-<2>
TY511-L<1>-<2>
Decription:
4G, 2-RS232, 2-RS485, 8-DI, 8-DO, 8-ADC, 2-Pulse, 3-Power output
4G, 2-RS232, 2-RS485, 8-DI, 8-DO, 8-ADC, 2-Pulse, 3-Power output
Note:
● <1>, means different module for different countries and regions
● <2>=G, GPS(from cellular module, not standalone GPS module)
● <1>, means different module for different countries and regions
● <2>=G, GPS(from cellular module, not standalone GPS module)
Frequency band:
4G LTE CAT 4
● EMEA:B1/B3/B5/B7/B8/B20/B38/B40/B41
● ANZ/LATAM:B1/B3/B5/B7/B8/B28
● NA:B2/B4/B5/B12/B13/B14
4G LTE CAT 4
● EMEA:B1/B3/B5/B7/B8/B20/B38/B40/B41
● ANZ/LATAM:B1/B3/B5/B7/B8/B28
● NA:B2/B4/B5/B12/B13/B14
1. <1> in part number means different frequency band for different market, <2> means the device supports GPS(G) or not, please ask Bivocom sales representatives or your local partner for more information.
2. Frequency band in the table are just part of our models, if you couldn't find the frequency band in your regions, please feel free to contact us.