Archives of #IoT

LoRa & 4G

Will Lora replace 4G LTE in IoT?

LoRa (Long Range) and 4G LTE (Long-Term Evolution) are both used in the Internet of Things (IoT) space, but they cater to different requirements and use cases. Whether LoRa will replace 4G LTE in IoT depends on the specific needs of the IoT application. Here are some key considerations:   Range and Power Consumption:   […]
Read More

What are benefits of wireguard for IoT?

Bivocom has released customized firmware on its industrial IoT edge gateway TG452(openwrt based Linux) to support wireguard, this article will give you a quick overview of what is wireguard, how wireguard work, and what benefits it brings to IoT(Internet of things)     What is Wireguard?   WireGuard is an open-source virtual private network (VPN) protocol […]
Read More

Controller Area Network(CAN) Test

What you can do with CAN port of TG452 is, it can implement CAN interface packets transmission to TCP, TCP packets transmission to CAN interface. The test of CAN communication as bellow:   Settings of Gateway Enable data collection Set baud rate of CAN port Set server protocol as Transparent Test process and Data transmission […]
Read More

What is a Remote Terminal Units (RTU)?

What is RTU? RTU stands for Remote Terminal Units, are devices used in industrial automation and control systems to monitor and control remote equipment and processes. RTU plays a crucial role in supervisory control and data acquisition (SCADA) systems.   RTUs are typically located in remote or hazardous environments, where they collect data from sensors and devices, […]
Read More

How to Setup VXLAN?

Communication mode of VXLAN (1) Routing mode: Communication between different network segments  End to End communication: The two end devices establish a direct VXLAN tunnel, through which all data traffic is transmitted. The subnets on both devices form a unified Layer 2 subnet.   Multiterminal forward communication: The objective is to establish a VXLAN tunnel […]
Read More

What is VXLAN? And its role in IoT?

What is VXLAN? VXLAN, which stands for Virtual Extensible LAN, is a network virtualization technology that allows the creation of virtualized Layer 2 networks over an existing Layer 3 infrastructure. It was developed to address the scalability limitations of traditional VLANs (Virtual Local Area Networks) in large-scale data center environments.   VXLAN encapsulates Layer 2 […]
Read More

How to Enable MQTT Broker?

Foreword In this case, we will need 2pcs TR321 and a PC, one of it works as MQTT Broker, another TR321 and PC works as MQTT Client. All of these devices connected with the same LAN of gateway.   MQTT Broker Settings (1) Open the WEBUI of MQTT Broker router, check the network status, the […]
Read More
MIPS, ARM and X86

Cons and Pros of MIPS, ARM and x86 in IIoT Industry

This article tells you what is MIPS, ARM and x86, their differences, as well as advantages and disadvantages of them for IIoT industry, and their usage for IoT routers.   What is MIPS? MIPS or Microprocessor without Interlocked Pipelined Stages, is a reduced instruction set computing (RISC) architecture developed by MIPS Technologies, Inc. MIPS processors […]
Read More

IoT-based Intelligent Power Inspection Robot

With the development of technology, power inspection robot is widely used in various industries. For example, in industrial production, building maintenance, traffic management, security monitoring, as well as healthcare, intelligent inspection robots are used. Therefore, intelligent power inspection robot is required in many different industries and plays an important role in today’s society. As an […]
Read More
We use cookies to deliver you the best experience. By browsing our website you agree to our use of cookies.